Suite a de nombreuse attaques ces derniers jours, je demande a toutes nouvelles personnes voulant s'inscrire sur le forum de la faire, et de m'envoyer un mail a l'adresse suivante: flacon030@me.com pour que je puisse valider l'inscription.
Désolé pour ce désagrément
Sélectionnez votre produit pour télécharger le système d'exploitation, l'utilitaire, les applications, le document et vérifier la compatibilité.
Voir QNAP Software Store ou le Les meilleures ventes Logiciels pour plus de licences qui portent votre NAS au niveau supérieur.
1 - Type de produit
Quel type de produit?
2 - Baie
Quel type de NAS QNAP ?
3 - Modèle
Quel est le modèle de votre produit?
Télécharger les éléments pour TS-855X
QTS
5.1.4.2596 build 20231128 2023-12-01
[Important Notes]
- This version is released in a staged rollout, which means we initially release this version to a small portion of users and then gradually reach more users over time.
[Security Updates]
- Applied multiple security updates to further enhance system security.
[Fixed Issues]
- Addressed an issue in Resource Monitor > Storage Resource > Disk Activity, where after selecting an enclosure, instead of showing only the disks on the selected enclosure, the page would show all disks on all enclosures.
- Resolved an issue in QuLog Center > Event Logs, where after performing an advanced search using custom keywords and then adding the search as a customized tab, the keywords might change after reopening QuLog Center.
- Fixed a rare issue in File Station where a file upload task might become unresponsive shortly after it began.
- Resolved an issue where after adding a NAS to an AD domain, accessing the domain user list in Control Panel would cause folders to be automatically created for all AD domain users. (Normally, a corresponding user folder should only be created after the domain user logs in for the first time.)
- Fixed an issue where users could not select disks on a TL-D800C expansion unit when trying to expand a storage pool by adding a new RAID group.
- Resolved an issue where some users could not successfully use Acronis Cyber Protect Home Office to back up an entire computer to the NAS.
- Fixed an issue in myQNAPcloud where after logging in with a QNAP ID and enabling AMIZ Cloud Agent but without joining the NAS to an organization, AMIZ Cloud Agent would show an "Abnormal" status and users could not see the NAS in AMIZ Cloud.
Compatibilité Compatibilité
Service d’assistance Service d’assistance
Apprenez-en plus sur nous
À propos de QNAP
Partenaires Technologiques
Espace actualités
Nous contacter
Devenir partenaire
Comparer les produits QNAP
Où acheter
Témoignages clients
Autres sites Web de QNAP
QNAP software store
Boutique d'accessoires
myQNAPcloud
Assistance
Service client
Centre d’aide
Conseils de sécurité
Modalités de garanties
Service RMA QNAP
Conditions générales du service RMA hors garantie
Assistance technique
Comment choisir un NAS pour la surveillance
Ressources
Centre de téléchargement
Statut de prise en charge des produits
Communauté QNAP
Source GPL
Developers
Service cloud
QNAP Blog
QuTube
Restez connecté
Facebook
Twitter
YouTube
Linkedin
Subscribe Newsletter
Je viens de mettre a jour le forum
Il est a présent dans sa dernière version, a savoir la version 3.3.11 et non sans mal
il reste de petits problèmes a régler avec les smileys dans les vieux posts qui pour certains ne s'affichent plus comme il faut
J'ai aussi mis a jour le firmware du NAS QNAP
[Important Notes]
- This version is released in a staged rollout, which means we initially release this version to a small portion of users and then gradually reach more users over time.
[Security Updates]
- Applied multiple security updates to further enhance system security.
[Enhancement]
iSCSI & Fibre Channel
- Users can now import LUNs exported from QuTS hero. (Previously, users could only import a LUN if the source and destination NAS devices ran the same operating system.)
[Fixed Issues]
- Fixed an issue where after enabling passwordless login, and then logging in with "Keep me logged in" selected, the "Keep me logged in" function would fail to activate and the user would have to log in again the next time.
- Addressed an issue where if the myQNAPcloud app was open, users could not open Microsoft Office files using the "Edit with Office Online" or "View in Google Docs" function in File Station.
- The "Edit Shared Folder Permission" window in Control Panel now no longer counts hidden folders in the total number of displayed folders.
- Fixed an issue in myQNAPcloud > DDNS > IPv4 adress > Settings, where after specifying an IP address, users were unable to click the "Apply" button if IPv6 was enabled for the system default gateway.
- Fixed an issue where under certain rare conditions, disabling or deleting user accounts could cause unexpected changes to the user group configuration file.
- Fixed an issue where the NAS might become unresponsive after expanding a thin LUN.
- Network & Virtual Switch now no longer applies previously configured DNS server addresses to a virtual switch after the user configures blank values for the DNS server address fields.
- Resolved an issue where if a virtual switch was configured as the default gateway and NAT was enabled on the virtual switch, the NAS would lose its WAN IP address after a system restart.
- Addressed an issue where under certain conditions Notification Center could not open properly.
- Resolved an issue where updating the firmware might cause myQNAPcloud to log out the QNAP ID account that was logged in.
- Fixed an issue where a power schedule configured to run only once would end up running once every year.
- Addressed a rare issue in HybridMount where a user might unexpectedly lose access permissions to an SMB remote folder after network reconnection.
- Fixed an issue on some ARM NAS models where trying to shut down the NAS under certain conditions could result in restarting the NAS.
- Fixed an issue where if the physical adapter used by the QXG-10G1T network expansion card was bound to a virtual switch, after the NAS woke up from sleep mode, the expansion card would fail to connect to the internet.
- Fixed an issue where replacing disks one by one in a Qtier-enabled storage pool might cause the pool to become a normal pool with Qtier disabled.
- Fixed an issue in Storage & Snapshots where under certain conditions the Create a Snapshot Replication Job wizard would display an incorrect size for the source data.
- Resolved an issue on the TVS-1282T3 where users could not connect to the NAS via two of its Thunderbolt ports after a firmware update.
- Fixed an issue where after configuring the NAS as a domain controller, restarting the NAS could change the DNS interface settings, causing users to become unable to connect to the NAS.
- Fixed an issue where after a disk failed and was replaced with a healthy disk, Storage & Snapshots would incorrectly label the healthy disk as unsuitable for rebuilding the RAID group when it was another disk in the RAID group that was faulty.
- Resolved an issue in Control Panel > Network & File Services > Network Access > Reverse Proxy, where if two rules were configured with the same source, after disabling one of the rules, users could not enable the rule again unless the other rule was also disabled.
- Fixed an issue where connecting to a domain name that had been configured as the source of a reverse proxy rule would unexpectedly redirect to the NAS login page, even though users had not yet mapped the domain name.
- Resolved an issue where after removing Multimedia Console from App Center, the system still displayed the "Multimedia Services" status as "Enabled" in System Status > System Service.
- Fixed a French translation issue in Control Panel > Privilege > Users.
- Addressed an issue for some users where the system could not shut down properly under certain conditions.
Un fou de ford ;-) https://site.ford-rs.frle site du forum.
sierra cosworth 2rm + RS1600i + Mustang GT 2007
Bonjour a tous
Mise a jour du forum en version 3.3.12
Elle s'est passé bizarrement
Je ne suis pas sur qu'elle soit vraiment passé en 3.3.12
Le forum était en version 3.3.11, mais tous semble fonctionner
J'en ai profiter pour mettre a jour le thème du forum AllanStyle-SUBSILVER en version 3.3.0 pour la version du forum en 3.3.11
Si vous rencontrez des problèmes merci de me les signaler
Un fou de ford ;-) https://site.ford-rs.frle site du forum.
sierra cosworth 2rm + RS1600i + Mustang GT 2007
Suite a la mise a jour du NAS je me suis aperçu que les connexion en HTTPS ne fonctionnaient plus comme il faut
Je vient de valider a nouveau les certificats et tous fonctionne a nouveau comme il faut
Désolé pour le désagrément
Un fou de ford ;-) https://site.ford-rs.frle site du forum.
sierra cosworth 2rm + RS1600i + Mustang GT 2007
[Security Updates]
- Applied multiple security updates to further enhance system security.
[Enhancement]
Control Panel
- To optimize storage stability, disk auto recovery is now enabled by default for device models that support this feature. Users can change this setting by going to "Control Panel > System > Hardware > General".
- Added two enhancements to IP access protection:
(1) Improved security: IP access protection is now enabled by default for SMB protocols.
(2) Greater flexibility: You can now select ""Exclude internal IP addresses"" to ignore failed login attempts from internal IP addresses.
To configure these settings, go to ""Control Panel > System > Security > IP Access Protection"".
Storage & Snapshots
- Optimized the performance of mounting snapshots.
[Fixed Issues]
- Resolved an issue where after restarting the NAS under certain conditions, QVR Pro would become disabled and could not be started.
- Resolved an issue where a user group could not be created normally if the "Description" field included certain special characters.
- Fixed an issue where a manually installed third-party app might connect via HTTP instead of HTTPS as expected.
- Improved the scroll bar user experience in the "Edit Shared Folder Permission" window in "Control Panel > Privilege > Shared Folders > Shared Folder".
- Fixed an issue where the syslog server on the NAS could not receive certain log messages from a third-party syslog generator.
- Fixed an issue where some users had to manually log in to Qfile Pro for Android and go through 2-step verification every time after closing and then reopening the app.
- Resolved an issue where some users could not mount an external drive formatted in EXT2.
- Addressed an issue where some users encountered slow read and write speeds under certain conditions.
- Fixed an issue in Storage & Snapshots where the "Snapshot Manager" window could only show two pages of files in a folder that actually contained more files.
- Resolved an issue in Storage & Snapshots where the volume management window displayed incorrect sizes for shared folders.
- Fixed a rare issue in iSCSI & Fibre Channel where the username and password fields in "Modify an iSCSI Target > iSCSI Target" might temporarily disappear under certain conditions.
- Fixed an issue where users could not open Security Center after unlocking an SED secure storage pool or volume.
- Resolved a rare issue where the NAS might stop responding after the user performed certain actions on a Samba shared folder.
- Fixed an issue in Storage & Snapshots where after removing a Thunderbolt card from the TVS-1582TU, the NAS diagram on the "Disks/VJBOD" page would display incorrect disk locations.
- Fixed an issue on the TS-1635AX where some users could not successfully update the firmware.
- Resolved a rare issue where after enabling SMB access logs, accessing a NAS shared folder via SMB from Windows might take a long time.
- Fixed an issue where Network & Virtual Switch could not display the up and down speeds of VLAN interfaces on trunk ports.
- Improved the NFS permissions mechanism.
- Fixed an issue where a trunk port failover caused the NAS to incorrectly show an iSCSI LUN to be offline and the LUN's target IQN to change.
[Other Changes]
App Center
- Starting from now, to access the beta versions of QNAP applications, please join the QNAP App Beta Program by going to "App Center > Settings > General".
Un fou de ford ;-) https://site.ford-rs.frle site du forum.
sierra cosworth 2rm + RS1600i + Mustang GT 2007